Hi All,

I have encountered an error in the phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/NTACT_ALTNT! during the ECC6 EHP6 upgrade.

Severe error(s) occurred in phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/NTACT_ALTNT!

Last error code set: Non single errors (code > 8) found in logfile 'NTMOVALTNT.ELG

ERROR: Detected the following errors:

# /EHP6/SUM/abap/log/PN800317.FED:

       3 ETP399  DONT TOUCH dep. LOADS          = no

       3 ETP399  RESET FLAG DBTABPOS            = no

       3 ETP399  protocol output to file      = yes, /EHP6/SUM/abap/tmp/PN800317.FED

       3 ETP301 ----------------------------------------------------------------------

       3 ETP399Xcopy nt "":

       2EETP399XRead table "                              ": pgntab call: table not found.

       2AETP399 Table "": unknown error -9

Any help is apprecated.

Regards,

Venkatesh Iyer

Dear All,

Upgrade and OS DB migration

Bit version :32 Bit

OS Version :win 2003

DB version :MS SQL 2005

SAP version :ECC5.0

we need to do upgrade the OS/DB/SAP Apllication and as well as need to do OS/DB migration..

Bit migartion:32 bit to 64 bit

OS migration :Windows to suse linux

DB migration :Ms sql server to sybase DB

kindly give me good idea to start the project for the above details.

Thank you

K.Mahendran

Hi All,

We have done successfully upgrade from ERP 6.0 to EHP6 sp09 and Now we have decide to go with EHP7 update fro two scenerios 1. From ERP 6.0 (kernel 700) to ERP6.0 EHP7 (Kernel 740) and 2 ERP 6.0 to EHP6 sp09 (kernel 721_EXT) to ERP6.0 EHP7 (Kernel 740). . here I have Two queries.

1.  -----------------------------------------------------------------------------------------------------------------

EHP7 for ERP6.0 with SP03

In that Mopz proposed EHP7 for ERP6.0 SP03 is available only for support pack update only. It suggest the note 1949802 which I am not able to get as MOPZ is still generating valid XML to update ERP6.0 EHP7 sp03

EHP7 for ERP6.0 with SP02

It gives the kernel 740 patch SP27, I was reading some SCN discussions of kernel SP27 is having some bugs and gives issue during preprocessing phase and update will have to reset. So I want to use Kernel 740 SP37, so how to achieve this as Mopz is not giving the option to select the latest kernel. I am afraid to modify the stack.xml file.

2.  --------------------------------------------------------------------------------------------------------------------

One more query is in phase Extraction I got error "the new SAP tools in /usr/sap/MES/SUM/abap/exe cannot connect to your database".

Which I believe is because of SSFS is not configured in source kernel. So question is how to configure this for Kernel 740 at this stage (after extraction).

SAP Note 1622837 says if your source kernel is 7.0x then two options --- option b says start with SUM and after error in Extraction Install SSFS with kernel 7.40 that is already unpacked. So how can I configure the SSFS with 740 as source system kernel is still running under 700

----------------------------------------------------------------------------------------------------------------------

Please help.

Regards

SS

Hi Supports,

I am using sapinst homogeneous system copy in Linux on sybase.

I stuck on the the step 27/49 "create Database".

I checked Firewall is off.

i got  points in my sapinst_dev.log that "

1)The log segment in the target database 'SID' is too small (9216 MB) to accommodate the log segment from the dumped database (10240 MB)"

and

2)"Can't change the owner of the master, model, tempdb or sybsystemprocs database"

Do i need to increase "sybase/SID/saplog_1" ?  because my "saplog_1" is 49 mb now.

if it is ! how do i increase in this stage.

can any one know about this error???

Thanks,

Aziz.

Hi all,

My ecc 6 EHP6 upgrade hangs at TABIM_POST_SHD .This is running for the past 5 hours still not completed.From pas experience this phase has never taken so much time .There are no backgroung jobs running nor are the logs being updated.Only 1 file is being updated which sort of runs in loop.

file name is N140317.FED .Following is its content.

=========

1 ED0320XStart phase "001" **********************************************************

1 ED0306       "Preprocessing of TBATG"

1 ED0301 *************************************************************************

1 ED0301X*************************************************************************

1 ED0306       "Preprocessing of TBATG"

1 ED0322 End phase  "001" ***********************************************************

1 ED0302X=========================================================================

1 ED0314 DD: Execution of Database Operations

1 ED0302 =========================================================================

1 ED0327 Process..................: "frecchrdev01_9_13959196"

1 ED0319 Return code..............: "0"

1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)

1 ED0309 Program runtime..........: "< 1 sec."

1 ED0305 Date, time...............: "17.03.2014", "16:30:41"

1 ED0318 Program end==============================================================

A2 ESEEF_BASE 500 Start mass activation for enh. objects at "41" (after-import call)"16:30:41"

1AETR012XProgram terminated (job: "RDDGEN0L", no.: "16304100")

1AEPU320 See job log"RDDGEN0L""16304100""FED"

1 ED0317XProgram start============================================================

1 ED0314

1 ED0314 DD: Execution of Database Operations

1 ED0314

1 ED0302 =========================================================================

1 ED0327 Process..................: "frecchrdev01_12_17104976"

1 ED0303 User.....................: "DDIC"

1 ED0305 Date, time...............: "17.03.2014", "16:31:41"

1 ED0307 Platform.................: "CUSTOMER"-"FED"("731")/"ORACLE/AIX/frecchrdev01"

1 ED0311 Tool.....................: "BATCH"/"RADBAT01"

1 ED0315 Log......................: "F", "/EHP6/SUM/abap/tmp/N140317.FED"

1 ED0314

1 ED0316 Program parameters:

1 ED0314 Process cat..............: sequential

1 ED0302 =========================================================================

1 ED0320XStart phase "001" **********************************************************

1 ED0306       "Preprocessing of TBATG"

1 ED0301 *************************************************************************

1 ED0301X*************************************************************************

1 ED0306       "Preprocessing of TBATG"

1 ED0322 End phase  "001" ***********************************************************

1 ED0302X=========================================================================

1 ED0314 DD: Execution of Database Operations

1 ED0302 =========================================================================

1 ED0327 Process..................: "frecchrdev01_12_17104976"

1 ED0319 Return code..............: "0"

1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)

1 ED0309 Program runtime..........: "< 1 sec."

1 ED0305 Date, time...............: "17.03.2014", "16:31:41"

1 ED0318 Program end==============================================================

A2 ESEEF_BASE 500 Start mass activation for enh. objects at "41" (after-import call)"16:31:41"

Any help is appreciated

Regards,

Venkatesh Iyer

Hi Experts,

We are planning to

• Upgrade from ECC 5.0 to ECC6 EHP 6 or EHP7

               Options: ECC5.0 upgrade to ECC 6.0 and Install EhP6

               Or directly upgrade ECC 5.0 to ECC 6.0 with EhP6.

• Windows 2003 server to Win 2008 R2.
• MS SQL 2005 to MS SQL 2008.

Please advise.

Thanks and Regards,

Joshi.

Dear Friends,

                We are using SAPEHP3 with MSSQL 2005 DB on windows.

One of my ABAP  calling one program using url

I would like to bring your attention on this issue, let me explain a bit, as i am calling an URL Address (https://api.qrserver.com/v1/create-qr-code/?data=MATERIAL&size=220x220&margin=0 ) from an ABAP program using a Standard SAP ABAP module "cl_http_client=>create_by_url" i am getting an error which shortly describe as "HTTP_COMMUNICATION_FAILURE"

for this issue i checked all services in sicf and SMICM, all services are running .

Please let me know the solution for this error, when he is calling program using Url , he is getting RAISE_EXCRETION DUMP, .

Please find the attachment.

Hi Team ,

I getting sapdump when i login into the system ,we have recently upgraded the system to EHP7 .

below attached was the dum details Kindly advice .

Thnaks

Hi All

I am planning to up grade ehp4 to ehp6 .

Please give me suggestions on prerequisites for upgrade.

1.How can we decide it is one step proces or two step process?

2.can we skip shadow instance creation step??

3.can we copy sum tool in /usr/sap/sid/sum??

Please give me clarification ....

Thanks in advance

Chandra

Hi

We are Upgrading 4.7 EXT200 to ECC6.0 Include EHP4 SR1.

Due to XML file i have rest the Upgrade at Configuration phase.

Again started with SAPUP and At Extraction phase i have encontered the following error,

SEVERE ERROR: EA-APPL                        is in an undefined state,

              that is not safe to be upgraded !!!

              Reason: Upgrade wasn't completed.

              Call the SAP Support!!!

Log:

399 "SAP_HRCSG","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SAP_HRCTH","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SAP_HRCTW","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SAP_HRCUS","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SAP_HRCVE","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SAP_HRCZA","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SAP_HRGXX","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SAP_HRRXX","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "SEM-BW","600","20090925","102915","20090925","102915","I","A","","","","",""

3 ETQ399 "ST-PI","2008_1_700","20090925","102915","20090925","102915","I","A","","2005_1_620","","",""

3 ETQ399 "WEBCUIF","700","20090925","102915","20090925","102915","I","A","","","","",""

1AETQ228 Detected invalid (temporary) start release "EA-APPL   

Please

Thanks

Anil

Hello,

I have a problem by creating user with copy.

After the copy of a user to another user, in a transaction the copied user don`t see some fields ( here in FB50 cost center).

The different between the user's are that the master was create in ECC 6.0 EHP0 and the new in ECC 6.0 EHP 6.

In an other system with ECC 6.0 EHP 0 the copie works well.

Can somebody please let me know where should be the problem.

Thank you in advance.

Best regards

Klaus Förster

I am unable to execute transaction KSU1 as the client is not modifiable.We have upgraded from 4.5B to ECC6 .is there any SAP notes regarding that or is there any alternate way to test the transaction.

Hi,

Currently, we are running with ERP 6.0 EHP4 and I have provided ST02 (Executed T-code) statistical to SAP, based on that SAP generated a EHP 7 business functions report to me.

After assesment, all the new business functions are not applicable in my environment, as most of the prerequisite features are not met.

As such, are we still recommended to upgrade to EHP7?

In my understanding, during EHP upgrade the new business functions can be activated selectively. Can i upgrade to EHP7 but without activate any new business function?

I believed during EHP upgrade, some SAP components' levels will automatically update to higer level, will this affect the existing function or reports?

Kindly advice,

Thanks,

Thomas

Hello

I'm installing the Supportpackagestack 10 for ERP6.0 EHP6 on the productive System. In the Extractionphase I get the following error:

The program has found 0 entries in DDXTT and 4835794 in DDXTF. All entries are listed in DDXTTCHK.LOG and DDXTFCHK.LOG.  Process the entries in DDXTT and DDXTF now as described in the Troubleshooting and Administration Guide.

I found some posts they advice to clear the Tables in TX SE16. But they had only a few entries in the DDXTT table. To erase an amount of 4835794 entries off the table scaries me.

What can I do to move on with the SPS10 installation? Or does someone know from where I get so much entries? What would happen if I erase all entries off the table?

Thanks for your input and advices

Kind regards

Michel

Hello Experts,

         We are update ERP 6.0 to EHP 7.

we are in step preprocessing and we received the following error as attached.

log as the following:-

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

A2EEMCEX 151 Entries for application "11" still exist in the extraction queue ->

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0ACCSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0CGRSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0SCNSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0SGRSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0KONSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0STHSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0STISETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11V_0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11V_0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11V_0SSLSETUP""110"

A2EEMCEX 141 Struct. appl. "12" cannot be changed due to setup table -> Long text" ""MC12VC0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "12" cannot be changed due to setup table -> Long text" ""MC12VC0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "12" cannot be changed due to setup table -> Long text" ""MC12VC0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long text" ""MC13VD0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long text" ""MC13VD0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long text" ""MC13VD0KONSETUP""110"

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_PRE ======== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

A2EEMCEX 151 Entries for application "11" still exist in the extraction queue ->

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0ACCSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0CGRSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0SCNSETUP""110"

A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long text" ""MC02M_0SGRSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0KONSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0STHSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11VA0STISETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11V_0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11V_0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long text" ""MC11V_0SSLSETUP""110"

A2EEMCEX 141 Struct. appl. "12" cannot be changed due to setup table -> Long text" ""MC12VC0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "12" cannot be changed due to setup table -> Long text" ""MC12VC0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "12" cannot be changed due to setup table -> Long text" ""MC12VC0SCLSETUP""110"

A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long text" ""MC13VD0HDRSETUP""110"

A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long text" ""MC13VD0ITMSETUP""110"

A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long text" ""MC13VD0KONSETUP""110"

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

1AETG778XThe program may not run when the system is in this status

4 EPU202XEND OF SECTION BEING ANALYZED END OF JOB_RSVBCHCK2 ================================================

We are do the following:-

To find terminated or unresolved updates, proceed as follows

1. Call transaction SM13.
2. Delete the default values for the client, user, and time.
3. Select all the update requests and clear them.

Also: Run the program RSM13002. For this purpose, set the parameter REORG to 'X'.

To find unresolved outbound queue RFC calls, proceed as follows:

1. Call transaction SMQ1.
2. Delete the default values for the client.
3. Make sure that the list of outbound queue RFC calls is empty.

Execute report RMCEX_SETUP_ENTRIES

after we do that we try to repeat this step but we received error as in the log attached.

Kindly aid us ASAP.

Regards

Said Shepl

Hi All,

Currently we  are having landscape of : SAP ECC6.0 and  Netweaver BI 7.0 EHP1(Dual stack).

Now we are palnning to upgrade our SAP ECC 6.0 to ECC EHP 7.
I request you to kindly let me know if any dependecies between ECC EHP7 and SAP Netweaver 7.0 EHP1 (BI)

Thanks and Regards,
Prasad

Dear Experts,

Recently I have an issue in sap that it is displaying the  web page as internet explorer in sap. I have tried so many links to set default browser as firefox but i cannot get proper information about transactions sicf and its services in so many links.

Is there any step-step procedure guide to set the service as firefox instead of internet explorer.

Please help me to resolve the issue.

Thanks in advance, Regards,

Eswar.

Hi Experts,

We are planning to

• Upgrade from ECC 5.0 to ECC6 EHP 6 or EHP7

               Options: ECC5.0 upgrade to ECC 6.0 and Install EhP6

               Or directly upgrade ECC 5.0 to ECC 6.0 with EhP6.

• Windows 2003 server to Win 2008 R2.
• MS SQL 2005 to MS SQL 2008.

Please advise.

Thanks and Regards,

Joshi.

Hi All,

We have planned to upgrade ecc 5.0 to ecc 6.0 ehp6 upgrade.

Can we upgrade direct ecc6.0 ehp6 using SUM tool ?

Any one have idea Please let me know.

Regards,

Arun.

     Hello,

     We want to Upgrade our PLM system from NWBC 731 to NWBC 740, for this it is better to have a SANBOX system to upgrade there first the NWBC740 and do some tests. And if everything is in order to Upgrade in the same time the DEV and TEST system?

     Do you now a better way to do such an upgrade?

     Thanks in advance,

     Florin Bosorogan