Dear All,

We are upgrading IDES ECC 6.0 EhP6 with the latest support packs through SUM. The stack was generated from MOPZ and the corresponding components were downloaded and SUM started ..

The process now stopped at the phase MAIN_TRANSEXEC/TABIM_TRANS with the following error :

------

Last error code set: Detected 62 errors summarized in 'TABIMTRNS.ELG'

Calling '/usr/sap/ZIE/DVEBMGS76/exe/tp' failed with return code 8,

check /oracle/ZIE/sapdata1/SUM/abap/log/SAPup.ECO for details

------

The logs I went through with respect to this error are :

-----------------------------------------------------------------------------

tp      version 380.08.46 (release 721, unicode enabled)
R3trans version 6.24      (release 721 - 26.09.13 - 20:13:07)

-----------
PHASES.Log
-----------

1EETQ399 Last error code set is: Detected 62 errors summarized in 'TABIMTRNS.ELG'
Calling '/usr/sap/ZIE/DVEBMGS76/exe/tp' failed with return code 8, check /oracle/ZIE/sapdata1/SUM/abap/log/SAPup.ECO for details
1EETQ203 Upgrade phase "TABIM_TRANS" aborted with errors ("20140205083500")

---------
SAPup.log
---------

CURRENTPHASE MAIN_TRANSEXEC/TABIM_TRANS
...started at 20140204192010
...begin processing at 20140204192010
..timestimes self: 222.090/23.150 usr/sys, children 367.340/30.160 usr/sys.
..finished at 20140204203320 with status FAILED.
-> Auto_repeat is active, count down is 2.
# Error message set: 'Detected 62 errors summarized in 'TABIMTRNS.ELG'

Calling '/usr/sap/ZIE/DVEBMGS76/exe/tp' failed with return code 8, check /oracle/ZIE/sapdata1/SUM/abap/log/SAPup.ECO for details'

---------
SAPup.ECO
---------

/usr/sap/ZIE/DVEBMGS76/exe/R3trans finished (0008).
ERROR: stopping on error 8 during MAIN IMPORT
stopping on error 8 during MAIN IMPORT

tp returncode summary:

TOOLS: Highest return code of single steps was: 8
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 8
meaning:
  A tool used by tp produced errors
SAPup> Process with PID 10005 terminated with status 8 at 20140205083334!

--------------
TABIMTRNS.ELG
--------------

4 ETW000  [     dev trc,00000]  NTAB: db_ntab(): tabname not set in key spec, returning 32                13  25.210879
3WETW000 different nametabs for table /ATL/AT086 (field MANDT).
3WETW000   Key field is not in NTAB.
4 ETW000      table /ATL/AT086: entry in DB is 6 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
4 ETW000 no entries from /ATL/AT086 (*) deleted (table is empty).
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
1 ETP111 exit code           : "8"

--------------
SAPI-60403INCCEE.ZIE
--------------

3 ETW674Xstart import of "R3TRWEBI/ATL/INDEX_SET" ...
4 ETW000 R3TR WEBI /ATL/INDEX_SET       was already imported successfully.
3 ETW677 "R3TRWEBI/ATL/INDEX_SET" not imported in this step.
4 ETW000 E071-LOCKFLAGs 002009 - 002009 updated ('1', 1 entries).
4 ETW000 SAPK-60403INCCEE     touched.
4 ETW690 COMMIT "312" "9672"
4 ETW000 9983476 bytes read.
4 ETW000 Transport overhead 21.6 %.
4 ETW000 Data compressed to 8.4 %.
4 ETW000 Duration: 1 sec (9983476 bytes/sec).
3 ETW710 "1" "0"
4 ETW000
4 ETW000 Summary:
4 ETW000
4 ETW000 9672 bytes modified in database.
4 ETW000  [     dev trc,00000]  Disconnecting from ALL connections:                                    52807  25.263686
4 ETW000  [     dev trc,00000]  Disconnecting from connection 0 ...                                       18  25.263704
4 ETW000  [     dev trc,00000]  Closing user session (con=0, svc=2f24b58, usr=2f58f00)                   364  25.264068
4 ETW000  [     dev trc,00000]  Server handle (con=0,svchp=2f24b58,srvhp=2f29c80) detached               993  25.265061
4 ETW000  [     dev trc,00000]  Disconnected (con=0) from ORACLE.                                         19  25.265080
4 ETW000  [     dev trc,00000]  Disconnected from connection 0                                            10  25.265090
4 ETW000  [     dev trc,00000]  statistics db_con_commit (com_total=32, com_tx=32)                         8  25.265098
4 ETW000  [     dev trc,00000]  statistics db_con_rollback (roll_total=0, roll_tx=0)                      10  25.265108
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0008).
4 ETW000 date&time: 05.02.2014 - 08:34:56
4 ETW000 208 warnings occured.
4 ETW000 2 errors occured.
1 ETP154 MAIN IMPORT
1 ETP110 end date and time   : "20140205083456"
1 ETP111 exit code           : "8"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED END OF TABIM_TRANS ==================================================

   
-------
TP.ECO
-------
SAPup> Starting subprocess with PID 16064 in phase 'TABIM_TRANS' at 20140205083429
'
'
EXECUTING /usr/sap/ZIE/DVEBMGS76/exe/tp  pf=/oracle/ZIE/sapdata1/SUM/abap/var/DEFAULT.TPP setstopmark buffer=ZIE before SAPK-60604ININSURANC
This is tp version 380.08.46 (release 721, unicode enabled)
tp finished with return code: 0
meaning:
  Everything OK

    -----------------------------------------------------------------

Please help on what has to be done here to over come this error and continue the up-gradation !!

Thanks in advance for your help !!

Msat

Hi,

How to check particular T code have any development or enhancement in their code. How to check.

If suppose if want to check ME53N , what are all the enhanced in that code. if if we click on Status  it is showing like as shown, how to go and where exactly change is their how to check.

here with attached doc.

We have a strangest issue with search help after upgrading the system to EHP6 (and SP accordingly). In the composite search help (F4) when we use dropdown for additional search values, either blank value or some text is being returned back to the field. This affects all such search helps in multiple transactions (XD03, VA03, KO04, you name it).

E.g. in this screenshot (XD03) when calling F4 for customer number, for the Country code when we double-click on one of the values, it should bring the value back to the search fields, but it doesn't.

So far I have not been able to find any notes or even SCN posts on this. This works the same way in different GUI versions. It works correctly in the non-upgraded system. Also it works if we change the Help setting to the Dialog(modal) vs. system default, but IMHO we should be able to use both options and both should work correctly.

Has anyone experienced the same issue after an upgrade?

Dear all,

Currently, we are using ECC6.0 EHP 4 basis version 701 with patch level 196.

Due to limited resources, we can only upgrade the basis version. May I ask is it possible to upgrade basis version only (upgrade from 701 to 731) without upgrade the Enhancement Package.

After upgrade, we target to retain in EHP 4 but basis version will be upgraded to 731. Is it feasible?

I searched the information from the forum, most of the result is NOT possible to updrade basis only without EHP upgrade. But I aslo heard from a seminar that it is possbile. I am not sure I got some misunderstanding. Hope you can share me your experience and give me some opinion?

Many Thanks for your help.

Sunny

Hello Master,

I have problem with sap learnig solution menu why the menu not found in my sap menu and spro, our system is ecc6 ehp6 and software component   SAP_HR604, EA_HR606 and LSOFE600 already install, and LSO has been activated. Any body can help me to resolved this problem?

My Sap Menu :

On SPRO :

Thank You

Luki IM

Hi ,

I am upgrading ERP 6 EHP 5 to EHP6, getting following error @ XPRAS_TRANS step at execution phase

Please help if you have any information

Thanks

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR-60601INFICA.ERS

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~3 EPU182 Post-processing for &2"AVAS"

&3"FE3E044ED44C3620E10000000A428275" was already performed successfully

earlier&1"R3TR"

3 EPU123 Post-import method "CLS_AFTER_IMP_AVAS" completed

for "AVAS" "L", date and time: "20121012151835"

2 EPU122XPost-import method "FDT_AFTER_IMPORT" started

for "FDT0001" "T", date and time: "20121012151835"

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

A3 EFDT_TRANSPORT 153 BRF+: Import queue evaluation for table type "S"

A3EEFDT_TRANSPORT 150 BRF+: Current transport, "SAPK-60601INFICA" , was

activated via "SAPK-606BWINFICA" with RC = "12"

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT"

for "FDT0001" "T"

3 EPU135 "FDT_AFTER_IMPORT" belongs to package "SFDT_TRANSPORT"

2EEPU136 The errors affect the following components:

2EEPU137 "BC-SRV-BR" ("BRFplus - ABAP-Based Business Rules")

1 ETP111 exit code : "8"

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR-60603INFICA.ERS

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~3 EPU182 Post-processing for &2"AVAS"

&3"F0C0004FA2DC8300E10000000A428274" was already performed successfully

earlier&1"R3TR"

3 EPU123 Post-import method "CLS_AFTER_IMP_AVAS" completed

for "AVAS" "L", date and time: "20121012151836"

2 EPU122XPost-import method "FDT_AFTER_IMPORT" started

for "FDT0001" "T", date and time: "20121012151836"

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

A3 EFDT_TRANSPORT 153 BRF+: Import queue evaluation for table type "S"

A3EEFDT_TRANSPORT 150 BRF+: Current transport, "SAPK-60603INFICA" , was

activated via "SAPK-606BWINFICA" with RC = "12"

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT"

for "FDT0001" "T"

3 EPU135 "FDT_AFTER_IMPORT" belongs to package "SFDT_TRANSPORT"

2EEPU136 The errors affect the following components:

2EEPU137 "BC-SRV-BR" ("BRFplus - ABAP-Based Business Rules")

1 ETP111 exit code : "8"

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR-60604INFICA.ERS

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~3 EPU182 Post-processing for &2"AVAS"

&3"9D6D8E4F066E4011E10000000A428726" was already performed successfully

earlier&1"R3TR"

3 EPU123 Post-import method "CLS_AFTER_IMP_AVAS" completed

for "AVAS" "L", date and time: "20121012151837"

2 EPU122XPost-import method "FDT_AFTER_IMPORT" started

for "FDT0001" "T", date and time: "20121012151838"

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

A3 EFDT_TRANSPORT 153 BRF+: Import queue evaluation for table type "S"

A3EEFDT_TRANSPORT 150 BRF+: Current transport, "SAPK-60604INFICA" , was

activated via "SAPK-606BWINFICA" with RC = "12"

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT"

for "FDT0001" "T"

3 EPU135 "FDT_AFTER_IMPORT" belongs to package "SFDT_TRANSPORT"

2EEPU136 The errors affect the following components:

2EEPU137 "BC-SRV-BR" ("BRFplus - ABAP-Based Business Rules")

1 ETP111 exit code : "8"

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR-606BWINFICA.ERS

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~A3 EFDT_TRANSPORT 040 BRF+: Data changes committed

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

A3 EFDT_TRANSPORT 014 BRF+: Runtime client: "000" / target client: " "

A3 EFDT_TRANSPORT 031 BRF+: Object activation of new version started

for "1.065" object IDs

A3WEFDT_TRANSPORT 073 BRF+: Activation of "4" object IDs was skipped

due to errors (step "Activate")

A3EEFDT_TRANSPORT 125 BRF+: <<< *** BEGIN: Content from Application

Component "FI-CA" *** >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"52120B4CDC76110AE10000000A428839"/&3"54120B4CDC76110AE10000000A428839") &1"Formula 'Last Ste

A3EEFDT_CORE 701 There is no active version of "Table 'Dunning History

Header (Table)'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"52120B4CDC76110AE10000000A428839"/&3"54120B4CDC76110AE10000000A428839") &1"Formula 'Last Ste

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"5B110B4CDC76110AE10000000A428839"/&3"5D110B4CDC76110AE10000000A428839") &1"Formula 'Lowest D

A3EEFDT_CORE 701 There is no active version of "Table 'Dunning Proposal

Line Items (Table)'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"5B110B4CDC76110AE10000000A428839"/&3"5D110B4CDC76110AE10000000A428839") &1"Formula 'Lowest D

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"8F130B4CDC76110AE10000000A428839"/&3" ") &1"Decision Table 'Simple

Strategy'" >>>

A3EEFDT_CORE 349 Errors when saving "Decision Table 'Simple Strategy'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"8F130B4CDC76110AE10000000A428839"/&3" ") &1"Decision Table 'Simple

Strategy'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"8F130B4CDC76110AE10000000A428839"/&3"8D130B4CDC76110AE10000000A428839") &1"Decision Table 'S

A3EEFDT_CORE 701 There is no active version of "Value Range '4 Days

Overdue'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"8F130B4CDC76110AE10000000A428839"/&3"8D130B4CDC76110AE10000000A428839") &1"Decision Table 'S

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D7130B4CDC76110AE10000000A428839"/&3" ") &1"Decision

Table 'Collection Steps'" >>>

A3EEFDT_CORE 349 Errors when saving "Decision Table 'Collection Steps'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D7130B4CDC76110AE10000000A428839"/&3" ") &1"Decision

Table 'Collection Steps'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D7130B4CDC76110AE10000000A428839"/&3"C7130B4CDC76110AE10000000A428839") &1"Decision Table 'C

A3EEFDT_CORE 701 There is no active version of "Boolean 'Condition Step

C001'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D7130B4CDC76110AE10000000A428839"/&3"C7130B4CDC76110AE10000000A428839") &1"Decision Table 'C

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"8D130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '4 Days

Overdue'" >>>

A3EEFDT_CORE 349 Errors when saving "Value Range '4 Days Overdue'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"8D130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '4 Days

Overdue'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"8D130B4CDC76110AE10000000A428839"/&3"F8120B4CDC76110AE10000000A428839") &1"Value Range '4 Da

A3EEFDT_CORE 701 There is no active version of "Formula 'Days in

Delay'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"8D130B4CDC76110AE10000000A428839"/&3"F8120B4CDC76110AE10000000A428839") &1"Value Range '4 Da

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"C6130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '2 Days

Before Due'" >>>

A3EEFDT_CORE 349 Errors when saving "Value Range '2 Days Before Due'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"C6130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '2 Days

Before Due'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"C6130B4CDC76110AE10000000A428839"/&3"F8120B4CDC76110AE10000000A428839") &1"Value Range '2 Da

A3EEFDT_CORE 701 There is no active version of "Formula 'Days in

Delay'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"C6130B4CDC76110AE10000000A428839"/&3"F8120B4CDC76110AE10000000A428839") &1"Value Range '2 Da

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"CC130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '12 Days

Overdue'" >>>

A3EEFDT_CORE 349 Errors when saving "Value Range '12 Days Overdue'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"CC130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '12 Days

Overdue'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"CC130B4CDC76110AE10000000A428839"/&3"F8120B4CDC76110AE10000000A428839") &1"Value Range '12 D

A3EEFDT_CORE 701 There is no active version of "Formula 'Days in

Delay'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"CC130B4CDC76110AE10000000A428839"/&3"F8120B4CDC76110AE10000000A428839") &1"Value Range '12 D

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"CD130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '8 Days

Since Last'" >>>

A3EEFDT_CORE 349 Errors when saving "Value Range '8 Days Since Last'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"CD130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '8 Days

Since Last'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"CD130B4CDC76110AE10000000A428839"/&3"C4130B4CDC76110AE10000000A428839") &1"Value Range '8 Da

A3EEFDT_CORE 701 There is no active version of "Formula 'Days Since

Last Step'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"CD130B4CDC76110AE10000000A428839"/&3"C4130B4CDC76110AE10000000A428839") &1"Value Range '8 Da

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D4130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '2 Days

Since Last'" >>>

A3EEFDT_CORE 349 Errors when saving "Value Range '2 Days Since Last'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D4130B4CDC76110AE10000000A428839"/&3" ") &1"Value Range '2 Days

Since Last'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D4130B4CDC76110AE10000000A428839"/&3"C4130B4CDC76110AE10000000A428839") &1"Value Range '2 Da

A3EEFDT_CORE 701 There is no active version of "Formula 'Days Since

Last Step'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D4130B4CDC76110AE10000000A428839"/&3"C4130B4CDC76110AE10000000A428839") &1"Value Range '2 Da

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"C7130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C001'" >>>

A3EEFDT_CORE 349 Errors when saving "Boolean 'Condition Step C001'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"C7130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C001'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"C7130B4CDC76110AE10000000A428839"/&3"C6130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_CORE 701 There is no active version of "Value Range '2 Days

Before Due'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"C7130B4CDC76110AE10000000A428839"/&3"C6130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"CB130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C002'" >>>

A3EEFDT_CORE 349 Errors when saving "Boolean 'Condition Step C002'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"CB130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C002'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"CB130B4CDC76110AE10000000A428839"/&3"8D130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_CORE 701 There is no active version of "Value Range '4 Days

Overdue'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"CB130B4CDC76110AE10000000A428839"/&3"8D130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D0130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C003'" >>>

A3EEFDT_CORE 349 Errors when saving "Boolean 'Condition Step C003'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D0130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C003'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D0130B4CDC76110AE10000000A428839"/&3"CC130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_CORE 701 There is no active version of "Value Range '12 Days

Overdue'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D0130B4CDC76110AE10000000A428839"/&3"CC130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D5130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C005'" >>>

A3EEFDT_CORE 349 Errors when saving "Boolean 'Condition Step C005'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D5130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C005'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D5130B4CDC76110AE10000000A428839"/&3"D4130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_CORE 701 There is no active version of "Value Range '2 Days

Since Last'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D5130B4CDC76110AE10000000A428839"/&3"D4130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D6130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C006'" >>>

A3EEFDT_CORE 349 Errors when saving "Boolean 'Condition Step C006'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D6130B4CDC76110AE10000000A428839"/&3" ") &1"Boolean 'Condition Step

C006'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"D6130B4CDC76110AE10000000A428839"/&3"8D130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_CORE 701 There is no active version of "Value Range '4 Days

Overdue'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"D6130B4CDC76110AE10000000A428839"/&3"8D130B4CDC76110AE10000000A428839") &1"Boolean 'Conditio

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"52120B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Last Step

Date'" >>>

A3EEFDT_CORE 349 Errors when saving "Formula 'Last Step Date'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"52120B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Last Step

Date'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"5B110B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Lowest Due

Date'" >>>

A3EEFDT_CORE 349 Errors when saving "Formula 'Lowest Due Date'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"5B110B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Lowest Due

Date'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"C4130B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Days Since

Last Step'" >>>

A3EEFDT_CORE 349 Errors when saving "Formula 'Days Since Last Step'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"C4130B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Days Since

Last Step'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"C4130B4CDC76110AE10000000A428839"/&3"52120B4CDC76110AE10000000A428839") &1"Formula 'Days Sin

A3EEFDT_CORE 701 There is no active version of "Formula 'Last Step

Date'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"C4130B4CDC76110AE10000000A428839"/&3"52120B4CDC76110AE10000000A428839") &1"Formula 'Days Sin

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"F8120B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Days in

Delay'" >>>

A3EEFDT_CORE 349 Errors when saving "Formula 'Days in Delay'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"F8120B4CDC76110AE10000000A428839"/&3" ") &1"Formula 'Days in

Delay'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"F8120B4CDC76110AE10000000A428839"/&3"5B110B4CDC76110AE10000000A428839") &1"Formula 'Days in

A3EEFDT_CORE 701 There is no active version of "Formula 'Lowest Due

Date'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"F8120B4CDC76110AE10000000A428839"/&3"5B110B4CDC76110AE10000000A428839") &1"Formula 'Days in

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"05A50B4CB976A25CE10000000A428726"/&3" ") &1"Rule 'Rule'" >>>

A3EEFDT_CORE 349 Errors when saving "Rule 'Rule'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"05A50B4CB976A25CE10000000A428726"/&3" ") &1"Rule 'Rule'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"05A50B4CB976A25CE10000000A428726"/&3"D7130B4CDC76110AE10000000A428839") &1"Rule 'Rule'" >>>

A3EEFDT_CORE 701 There is no active version of "Decision

Table 'Collection Steps'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"05A50B4CB976A25CE10000000A428726"/&3"D7130B4CDC76110AE10000000A428839") &1"Rule 'Rule'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"EFA70B4CB976A25CE10000000A428726"/&3" ") &1"Rule 'Rule'" >>>

A3EEFDT_CORE 349 Errors when saving "Rule 'Rule'"

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"EFA70B4CB976A25CE10000000A428726"/&3" ") &1"Rule 'Rule'" >>>

A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs

(&2"EFA70B4CB976A25CE10000000A428726"/&3"8F130B4CDC76110AE10000000A428839") &1"Rule 'Rule'" >>>

A3EEFDT_CORE 701 There is no active version of "Decision Table 'Simple

Strategy'" in the database yet

A3EEFDT_TRANSPORT 026 BRF+: <<< END : Messages for IDs

(&2"EFA70B4CB976A25CE10000000A428726"/&3"8F130B4CDC76110AE10000000A428839") &1"Rule 'Rule'" >>>

A3EEFDT_TRANSPORT 126 BRF+: <<< *** END : Content from Application

Component "FI-CA" *** >>>

A3EEFDT_TRANSPORT 034 BRF+: Object activation failed (step: "Save" )

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

A3 EFDT_TRANSPORT 154 BRF+: Import queue update with RC "12"

A3 EFDT_TRANSPORT 100

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT"

for "FDT0001" "T"

3 EPU135 "FDT_AFTER_IMPORT" belongs to package "SFDT_TRANSPORT"

2EEPU136 The errors affect the following components:

2EEPU137 "BC-SRV-BR" ("BRFplus - ABAP-Based Business Rules")

1 ETP111 exit code : "8"

>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE

<<<

XPRAs are application reports that run at the end of an upgrade.

Most XPRA reports have a report documentation that explains what

the report does and how errors can be corrected.

Call transaction se38 in the SAP system, enter the report name,

select 'Documentation' and click the 'Display' button.

>>> The problematic XPRAs are mentioned in messages of type PU132 above

<<<

Hi all,

I installed ECC 6.0 ehp7 but sap_hr 600 available but i need to update hr patches also.

I don't have solution manger system so is there any option to update latest patches with out stack files.

i have already informed to client with out solution manager we can't update to latest version of sap_hr and ea_hr.

Please correct me if i am wrong.

Let me know if any other option with solution manger.

Please suggest me what is correct option.

Thanks

Chandra

Hi Experts,

we are upgrading a new sap EPR6 EHP4 system build via system copy of dev system ans trying to upgrade it to EHP7.

In the Pre-processing phase, its showing below message initially.

then we have released the TR and tried to continue, but we are still left with the bellow message.

we tried checking for invalid objects, but there are no objects found in the TR's we released .

we have also check the TR objects and no such above displayed object is present in the TR.

also tried to activate all the inactive objects in system with program: RSDG_IOBJ_ACTIVATE but still same status.

Please suggest.

Thanks in advance.

sagar.

Hi all,

We doing the client copy from the default client 800 to the newly created client 500. After doing all the steps after clicking start immediately button, its starts copying. But after some time, at the bottom of the screen it is showing 'MAXIMUM RUNTIME EXCEEDED' ..

WHAT'S THE REASON FOR THAT??  Please help...

Regards

Praveen

Hello all,

Need help on this,

i have a ERP 5 with historical data in SQL 2005, and ím planning a upgrade to SQL 2012 and windows server 2012

is this possible to do with backup/restore method?

or do i need to do a upgrade?

Kind regards

Oscar

I am getting following error while running SUM , please help , EHP_INCLUSION log is attached too, please help

from : SAPup_troubleticket.log

4 ETQ399 Deleting '/usr/sap/SID/SUM/abap/data/RGPFD21.SAP'.

4 ETQ399 Deleting '/usr/sap/SID/SUM/abap/cofiles/KGPFD21.SAP'.

4 ETQ399 Deleting '/usr/sap/SID/SUM/abap/data/R-73602INFINBASIS.SAP'.

4 ETQ399 Deleting '/usr/sap/SID/SUM/abap/cofiles/K-73602INFINBASIS.SAP'.

4 ETQ399 Deleting '/usr/sap/SID/SUM/abap/data/R-60020INECCDIMP.SAP'.

4 ETQ399 Deleting '/usr/sap/SID/SUM/abap/cofiles/K-60020INECCDIMP.SAP'.

4 ETQ399 Deleting '/usr/sap/SID/SUM/abap/data/RB73105.SAP'.

4 ETQ399 ... ERROR in patch queue handling

1EETQ399 Last error code set is 'RFC error system SID nr 00 function 'SPDA_DISASSEMBLE_QUEUE' failed with code 3 key DATASET_WRITE_ERROR: Error when writing to the file /usr/sap/SID/SUM/abap/data/RB73105.SAP.

If you put new packages in the download directory, use option 'init' to upload them'

1EETQ204 Upgrade phase "EHP_INCLUSION" aborted with severe errors ("20130119030858")

sapsidci:sidadm 160> tail -100 SAPup_troubleticket.log

This trouble ticket was created by SAPup on 20130119030858

-------------------------------------------------------------

SAPup broke during phase EHP_INCLUSION in module PREP_EXTENSION / Extension module

Error Message: RFC error system SID nr 00 function 'SPDA_DISASSEMBLE_QUEUE' failed with code 3 key DATASET_WRITE_ERROR: Error when writing to the file /usr/sap/SID/SUM/abap/data/RB73105.SAP.

If you put new packages in the download directory, use option 'init' to upload them

-------------------------------------------------------------

-------------------------------------------------------------

Summary of SAPup:

-------------------------------------------------------------

SAPehpi Release:        lmt_007

SAPehpi Version:        SAPup release lmt_007 version 47.000

Start Release:          731

Target Release:         731

-------------------------------------------------------------

Summary of host system details:

-------------------------------------------------------------

SID:                    SID

Host:                   sapsidci

MS Host:                sapsidci

GW Host:                sapsidci

Start Path:             /usr/sap/SID/DVEBMGS00/exe

Kernel Path:            /usr/sap/SID/DVEBMGS00/exe

-------------------------------------------------------------

Summary of operating system details:

-------------------------------------------------------------

OS Type:                AIX

OS Version:             6.1.0

-------------------------------------------------------------

Summary of database details:

-------------------------------------------------------------

Database Type:          ora

Database Version:       11.2.0.3.0

-------------------------------------------------------------

Summary of RFC details:

-------------------------------------------------------------

Host:                   sapsidci

GW Host:                sapsidci

Client:                 000

Destination:            SID

Language:               E

System No.:             00

-------------------------------------------------------------

-------------------------------------------------------------

Hi ,

I am getting below error during EHP upgrade at MAIN_SHDCRE/SHADOW_IMPORT_UPG1 step in Pre-processing stage.

Error Details:

Checks after phase MAIN_SHDCRE/SHADOW_IMPORT_UPG1 were negative!

Last error code set: Detected 1 aborted activities in 'SHDUPGIMP1.ELG'<br/> Calling '/usr/sap/install/SUM/abap/exe/tp' failed with return code 12, check /usr/sap/install/SUM/abap/log/SAPup.ECO for details

ERROR: Detected the following errors:

# /usr/sap/install/SUM/abap/log/SAPK731MQ03.<- SID ->:

4 ETW000 [ dev trc,00000] SELECT "TRKORR","POS","ATTRIBUTE","REFERENCE" FROM "E070A~" WHERE

"TRKORR"=:A0 AND "POS"=:A1

4 ETW000 20 0.096955

4 ETW000 [ dev trc,00000] stmt_fetch() -> orc=942, 103=DBSL_ERR_DBOBJECT_UNKNOWN 14 0.096969

4 ETW000 [ dbtrtab ,00000] ***LOG BZA=>table E070A~ does not exist on database

4 ETW000 25 0.096994

2EETW000 sap_dext called with msgnr "2":

2EETW000 ---- db call info ----

2EETW000 function: db_rtab

2EETW000 fcode: RT_READ_ONLY

2EETW000 tabname: E070A~

2EETW000 len (char): 88

2EETW000 key: SAPK731MQ03 888888

2EETW000 retcode: 2

Any Help will be appreciated.

Hello,

I have some problems with an EHP7 upgrade in downtime phase MAIN_NEWBAS/JOB_RSUPGCUA_PROD. The step comes to no end and in the log file you can only see this:

bash-4.1$ cat PSUPGCUA.LOG

1 ETQ201 Entering upgrade-phase "MAIN_NEWBAS/JOB_RSUPGCUA_PROD" ("20141013201000")

2 ETQ367 Connect variables are set for standard instance access

4 ETQ399 System-nr = '01', GwService = 'sapgw01' Client = '000'

4 ETQ399 Environment variables:

4 ETQ399   dbs_db6_schema=sapr3

4 ETQ399   auth_shadow_upgrade=<null>

1 ETQ200 Executing actual phase 'MAIN_NEWBAS/JOB_RSUPGCUA_PROD'.

1 ETQ399 Phase arguments:

2 ETQ399 Arg[0] = 'RSUPGCUAGEN111'

2 ETQ399 Arg[1] = ''

2 ETQ399 Arg[2] = 'NO-IGNORE'

2 ETQ399 Arg[3] = 'RSUPGCUAGEN111\.$(SAPSID)'

2 ETQ399 Arg[4] = '5'

2 ETQ399 Arg[5] = 'CUA GEN'

1 ETQ399 Using error summary log 'PSUPGCUA.ELG'.

1 ETQ399 Expanded phase arguments:

2 ETQ399 Arg[3] = 'RSUPGCUAGEN111\.SBX'

4 ETQ260 Starting batchjob "RSUPGCUAGEN111"

1 ETQ359 RFC Login to: System="SBX", AsHost="sapsbx" Nr="01", GwHost="sapsbx", GwService="sapgw01"

2 ETQ232 RFC Login succeeded

4 ETQ010 Date & Time: 20141013201002

1 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC

2 ETQ373 parameter "BATCHHOST" = "sapsbx"

2 ETQ373 parameter "JOBNAME" = "RSUPGCUAGEN111"

2 ETQ373 parameter "REPNAME" = "RSUPGCUAGEN111"

2 ETQ373 parameter "VARNAME" = ""

2 ETQ373 parameter "IV_SCHEDEVER" = " "

2 ETQ373 parameter "BATCHINSTANCE" = ""

I can connect to production instance with DDIC user in client 000 and can see in SM50 that the wp´s are waiting for enqueue-server. With ps -ef I cannot find any en.sap-process for the prod-instance. There is only an enqueue-process for the shadow instance!

Thank for any helpful answers!

Regards, Karlheinz

Hi,

We have downloaded the dbsl patch version(318) from marketplace. We

have done the uncar, extracted the files and copied the files to the kernel

location. After restarting the server again, while checking the sm51, the dbsl

patch version in our server is still the same(315).

Please help...

Regards

Praveen

Hi Experts,

I am upgrading ECC6 EHP 6 ( NW731) from stack 5 to Stack 12 with SUM 1.0 with SP11,

System is on Oracle 11G / AIX 6.1

Selected option "single system long downtime no shadow instance or exclusive shadow instance"

Now upgrade is in execution phase , and  the step MAIN_TRANSEXEC/PARMVNT_TRANS running for last 15 hours as shown below , SAP app is down , I can see one tp process is running and in /SUM/abap/tmp directory one file PA011015.SID is slowly growing

Please let me know if there is any information on this situation

Hi Experts,

we are performing EHP3 upgrade of CRM7.0 system and in the extraction phase, we came across an issue where its not taking password for SYSTEM and SAPSR3 user.

so we tried to check the user status from SQL and the status is open, and we tried to connect to database with SYSTEM & SAPSR3 but we are getting below error.

please suggest.

the TCM system is recently build with system copy and migrated the database version from 10g to 11g.

we have also tried to confirm if the TNS file is correctly configured with below command.

Please help us in resolving the issue.

Hi,

Can we setup email alerts , such a way that tool can send out a email when the upgrade encountered a error or if it is waiting for a input.

Thanks,

Tanuj

Hi,

We are upgrading the SAP system R/3 4.7 to ECC 6.0 EHP7. and found many BADIs became inactive.

We also have EHP6 system and found total 885 standard BADIs are active where as in new EHP7 system, just 34 BADIs are in active status. The Notes 1898691 and 1969777 are stating that this was fixed with SUM SP9 patch level 6 or above. We used SUM SP10 patch level 8. the Note 1969777 has fix for custom BADIs. But I couldn't find anything to fix the Standard BADIs inactive issue.

Please help me if you have any information on this issue.

Thank you.

Hi Experts,

we have initiated SAP CRM EHP3 upgrade and started the activity and in preparation phase we got a issue with ops$ mechanism which required us to set up the SSFS configuration to connect database Oracle11g with Sap kernel 740.

after that the preparation continued and in phase PREP_IMPORT/TOOLIMPI it took long time and we waited for 10hrs and then we have stopped the process and cleaned SUM and restarted SUM tool with fresh dump.

again its taking long time in PREP_IMPORT/TOOLIMPD phase.

in the Log folder of SUM not file is getting updated and in temp folder only one file dev_evt is updating with time stamp only not data is being updated in the file.

Kindly suggest experts.

Hi,

we are performing EHP4->EHP7 upgrade using latest SUM it is Oracle11.2.0.2 and windows 2008serverR2.

CURRENTPHASE MAIN_TRANSEXEC/TABIM_TRANS

...started at 20141017091235

..finished at 20141017091235 with status ABORTED.

# Error message set: 'Inconsistent status for buffer creation'

I cannot find anything useful to troubleshoot this issue...

Any ideas how to fix this?

Regards,

Martin